ZOELLER
GRINDER
Sewage Pumps

DEAN BENNETT SUPPLY
Independent Zoeller Pump Distributor
Toll Free   800 - 621 - 4291

The Zoeller Shark Grinder Sewage Pump is a completely automatic pump with starting controls built right into the pump case. Control panels are not required for operation. Durable heavy duty finned cast iron construction. The cutters are protected from abrasive solids. Legs provide for a free standing installation. Easily adapts to a rail system installation. Oil filled hermetically sealed motor with class B windings, carbon ceramic mechanical shaft seal, automatic thermal overload protection and stainless steel screws, bolts and lifting handle.

HEAD CAPACITY CHART FOR WD820 GRINDER PUMP

Total Head in Feet
Gallons Per Minute

5' - 40'
48 gpm

50'
45 gpm

WD-820 Automatic Grinder Pump
2 Horsepower 230 volt single phase motor
3450 rpm - 13.7 amp draw
1-1/4" female NPT pump discharge - 20' cord length
Balanced bronze impeller
Stainless steel cutter plate and cutter blades
Shipping weight 87 lbs.

ZOELLER'S PROGRESSIVE CAVITY
SEWAGE GRINDER PUMP
Equal to ENVIRONMENTAL ONE

#922-0007 Factory Assembled WD820
Simplex Grinder Package System
$ 3325.00*
( 24" x 72" Job Ready as pictured to right )

THIS FACTORY ASSEMBLED SYSTEM IS NOW A 
DENVER STOCK ITEM - READY FOR DELIVERY

This factory assembled system consists of the
WD 820  2 hp  230 v  Automatic Sewage Grinder Pump
24" x 72" Simplex Basin, fiberglass lid, brass disconnect
fitting and 1-1/2" Stainless steel Guide Rail System.
System is assembled with 1-1/4" cast iron sewage check
valve and 1-1/4" galvanized steel discharge pipe.

24" x 60" FIBERGLASS SIMPLEX BASIN Simplex Tank suitable for outdoor burial installation. #31-0946          $ 555.00* Download Burial Basin in pdf This 24" x 60" deep fiberglass simplex basin is designed for outdoor installation for a single sewage pump or for a grinder pump. The basin has an anti-floatation ring to prevent the tank from rising due to ground water. A solid 3/8" thick fiberglass lid covers the tank, while you get 5 grommet seals, one 1-1/4", one 1-1/2" two 2", and one 4", to install incoming and outgoing pipes.

36" x 60" FIBERGLASS DUPLEX BASIN NOW IN DENVER STOCK #31-1451          $ 1050.00* This 36" x 60" fiberglass outdoor burial basin is designed for a duplex 2 pump installation. The basin comes complete with a set of 5 Adapta-Flex seals for installing your lines in and out of the basin. The seals are one 1-1/4", one 1-1/2", two 2", and one 4". This basin can be used with 2 sewage grinder pumps, or 2 standard Zoeller sewage pumps, for a duplex 2 pump sewage system.

RAIL SYSTEMS FOR INSTALLATION IN THE ABOVE OUTDOOR BURIAL BASINS $ 275.00  #SPDS5     Build your own burial sump or sewage package. This rail system has connection for an 1-1/4" from the pump to the discharge. Install the sewage pump disconnect rail system into any of the outdoor burial basins above, to accommodate installation of your sewage pump, making it like the packaged system we offer above. The rails are 3/4" pipe size, for the ability to fit any depth tank. $ 355.00 #SPDS8     This 2" sewage pump disconnection rail system is just like the unit above, except that it is for 2" discharge pumps to a 2" discharge line. The rail system still uses the 3/4" pipe size rails, and can be sized to fit any burial outdoor sewage tank. The above sewage pump disconnect rail systems can also be used in the indoor sewage basins that install into your basement floor. This makes it easier to remove the pump from the basin, and even easier to align the pump when re-installing it into the basin.

* Due to high truck freight cost on basins and sewage systems larger than 18x30
it is necessary to charge $ 125.00 surcharge on these basins and systems.