ZOELLER
Float Switches

DEAN BENNETT SUPPLY
Independent Zoeller Pump Distributor
Toll Free   800 - 621 - 4291


  PUMP DOWN to EMPTY TANK   FLOAT SWITCHES

The Pump Down to Empty Tank control is used with sump and sewage pumps. We stock these variable level float switches in the piggy-back plug-in design. The float switch plugs into the outlet and then the pump plugs into the piggy-back switch. These plugs are wired for either 115 volt or 230 volt use and all come with a 15' cord.
These variable level float switches are mechanically activated and DO NOT CONTAIN MERCURY to avoid any environmentally sensitive concerns.
The single ball switch has only one float that controls both the on and off function of the pumping range.
The double ball float switch has two floats. One that turns the pump on and one that turns the pump off, which allows for a much wider range of on and off levels.
Single ball switches can be direct wired by cutting off the plug.
Double ball float switches MUST be used with the plug. DO NOT CUT THE PLUG OFF THE DOUBLE BALL FLOAT SWITCH.
The States of CT, RI, ME, IL, VT, MN, NY, MA & CA can not use mercury floats - must buy special floats

pumprange.gif (5558 bytes)
piggyback.gif (5553 bytes)


#10-0034
No Mercury


$   32.25


115 Volt Junior Single Ball Float Switch Control has a piggy-back plug for use with up to 13 amps maximum.


#10-0032
No Mercury


$   51.00


115 Volt Super Single Ball Control for 15 amps maximum has piggy-back plug. Must be used with #140, #163 and #270 Zoeller Pumps.

#10-0706
No Mercury
$   37.75
230 Volt Single Ball Control  13 amps maximum. Has 20' Piggy-back plug. For use with #293 Zoeller Pump.


#10-0033
No Mercury


$   55.50


230 Volt Super Single Ball Float Switch Control has a piggy-back plug for up to 15 amps maximum.

#1016864
No Mercury
$ 109.95
115 Volt Mechanical Double Ball Float Switch for pump down. 15' piggy back plug for 13 amps maximum.


#10-0229
Mercury Switch


$   93.00


115 Volt Super Double Ball Float Switch Control has piggy-back plug for up to 15 amps maximum.

#1017657
No Mercury
$ 108.00
230 Volt Mechanical Double Ball Float Switch for pump down. 15' piggy back plug for 13 amps maximum.


#10-0230
Mercury Switch


$   98.25


230 Volt Super Double Ball Float Switch Control has piggy-back plug for up to 15 amps maximum.
sensor-with-plug.gif (26520 bytes)

sensor-wo-plug.gif (25036 bytes)


PUMP UP to FILL TANK   FLOAT SWITCHES

The Pump Up to Fill Tank controls serve just the opposite function as described above and are used to turn a pump off when cistern or tank is full. We stock these in open end ( without plug ) for direct wiring purposes. Since there is no plug, they can be used for either 115 volt or 230 volt use. All come with 15' cord. These variable level float switches are mechanically activated and DO NOT CONTAIN MERCURY to avoid any environmentally sensitive concerns.


#1002725
  $ 44.50
No Mercury
Junior Single Ball Float Switch Control, without plug for use with up to 13 amps maximum. Can be used for either 115 volt or 230 volt direct wiring.

#1003253
  $ 61.25
No Mercury
Super single Ball Float Switch Control, without plug for use with up to 15 amps maximum. Can be used for either 115 volt or 230 volt direct wiring.

JUNIOR SWITCHES are for pumps up to 1/2 hp at 115 volts or 1 hp at 230 volts drawing a maximum of 13 amps.

SUPER SWITCHES are for pumps up to 3/4 hp at 115 volts or 2 hp at 230 volts drawing a maximum of 15 amps.


SENSOR FLOAT CONTROLS
#10-0744
  $ 25.00
No Mercury		 Non-Mercury sensor float for panels normally open control used with control panels with a 20' cord. sensor.gif (24314 bytes)
#01-1832
  $ 25.00
No Mercury		 Identical to the 10-0744 above.

#10-0225
  $ 28.00
Mercury Switch
Sensor Float with internal weight is a normally open control used with alarms and alternator packages. It has a 15' open end cord and can be used in either 115 volt or 230 volt installations.
#10-0022
  $ 38.50
Mercury Switch		 Same as above unit except with 35' cord.

#1002152
  $ 40.75
Mercury Switch
#15-SWE-NO normally open sensor is the same as above except it has an external adjustable weight attached to the cable. It is used in any application where the float is suspended from
above, rather than being attached to the pipe.

#1006047
  $ 30.50
No Mercury
Sensor float switch with 15' open end cord that is normally closed. Rated 5 amps at either 115 volt or 230 volt. Float is not weighted, but comes with pipe tie clamp to control alarm activation level. Mechanically activated for drinking water rated low water alarms.

FREIGHT IS PREPAID IF ORDER IS OVER  $  1,000.00


Zoeller Home Page        Contact us        PLACE AN ORDER

Zoeller Effluent Sump Pumps         Zoeller Sewage Pumps        

Zoeller "BEST BUY" Pumps           Zoeller Sewage Basins

Zoeller Grinder Type Sewage Pumps           Zoeller Check Valves

Zoeller Packaged Sewage Systems           Zoeller Control Panels

DEAN BENNETT SUPPLY Home Page


Prices effective November 5, 2008