is an economical way to hold pipe while lifting or lowering a pump in a well. It will handle galvanized steel pipe 1", 1 1/4", 1 1/2", and 2" in size.
$ 189.00
| PIPE HANDLING TOOLS |
DEAN BENNETT SUPPLY CO |
|
|
#8871 Rancher's Pipe Holder is an economical way to hold pipe while lifting or lowering a pump in a well. It will handle galvanized steel pipe 1", 1 1/4", 1 1/2", and 2" in size. |
$ 189.00 |
The non-shock load limit is rated at 2000 lbs. The catch has a corrugated or concave face which reduces the possibility of pipe slippage. The pipe holder is mounted on a heavy 2" thick wood base plank. |
|
| Kwik Klamp Pipe Holder has a replaceable serated jaw of tempered steel - pipe size and tension adjuster is a 7/8" acme threaded rod located inside of the front jaw. Unit will hold 1" thru 2" pipe at any point along the pipe. Handles galvanized and Sch 80 PVC equally well, and is tested at up to 3500 lbs. Single hand operation with a safety lock pin to prevent accidental opening or release. |  Kwik Klamp $ 420.00 |
KWIK KLAMP2 for 2" thru
4"
|
||
|
KWIK KLAMP2 for Pipe Sizes
2-1/2", 3", and 4" The all new heavy duty
KwikKlamp2 is the drillers answer to holding the larger pipe sizes from
2-1/2" up through 4". KwikKlamp2 is basically an enlarged version of
the popular KwikKlamp which is designed for pipe up through 2" in
size, with many of the same features. The tool has been used world wide by
environmental drillers, pump installers, well servicemen, and water well
drillers. The main body is constructed of 2" and
2-1/2" steel
tube with 1/4" wall thickness. Easy to operate, over center locking
of jaws when downward pressure is applied to the 19" long lever
handle. 1/2" safety pin is used to prevent accidental unclamping.
KwikKlamp2 allows workers to bring pipe or drill joint up to an easy
working level because it bites anywhere on the side of the pipe. The tool
weighs 30 lbs. and it is 20" long and 7-1/2" wide. The jaws are
equipped with 16 carbide tipped grippers for excellent holding capability
with load tests done over 7000 lbs. The KwikKlamp2 is designed to hold
PVC, HDPE, Stainless Steel, and Galvanized Steel pipe in 2-1/2", 3" and 4" pipe sizes. |
||
|
|
KwikKlamp2 offers you the extra gripping power to hold any type of pipe from the side of the pipe to prevent it from slipping. |
|
|
  |
# 681 Rancher's Pipe Dog Lifter is an inexpensive pipe lifting and setting tool. The heavy duty serrated eccentric wheel will handle 1" thru 2" pipe without slippage. This pipe clevis is designed for light weight service only, IT IS NOT RATED OR TESTED - DO NOT OVER MATCH IT. |
|
||
|
Download Drop Pipe
Elevators in pdf
|
| 1" Chain Type Drop Pipe Elevator |
$ 206.00 pair |
|
| 1-1/4" Chain Type Drop Pipe Elevator |
$ 212.00 pair |
|
| 1-1/2" Chain Type Drop Pipe Elevator |
$ 218.00 pair |
|
| These bail type steel pipe elevators are designed for the well driller and pump installer. Normally used in pairs, however you can use only one elevator if a pipe holder is also used during installation. All steel fabricated construction allows these heavy duty pipe elevators to handle up to 10,000 lbs. |
 |
DENVER STOCK ELEVATOR SIZES |
|
| $ 355.00 | 1" Elevator |
|
| $ 380.00 | 1 1/4" Elevator | |
| $ 455.00 | 2" Elevator | |
| $ 495.00 | 2 1/2" Elevator | |
| $ 535.00 | 3" Elevator | |
| $ 615.00 | 4" Elevator | |
SPECIAL ORDER ELEVATOR SIZES ( EACH ) |
||
| $ 335.00 | 1/2" Elevator | |
| $ 335.00 | 3/4" Elevator | |
| $ 420.00 | 1 1/2" Elevator | |
| $ 575.00 | 3-1/2" ( 4" OD ) | |
| $ 725.00 | 4-1/2" ( 5" OD ) | |
| $ 810.00 | 5" Elevator | |
| $ 810.00 | 6" Elevator | |
| $ 925.00 | 7" Elevator | |
| $ 1075.00 | 8" Elevator | |
| $ 1545.00 | 10" Elevator | |
| $ 2025.00 | 12" Elevator | |
| $ 2690.00 | 14" Elevator | |
| $ 3325.00 | 16" Elevator | |
|
| These light weight PVC plastic pipe and casing elevators will work on either belled end pipe or pipe with couplings. Elevators are constructed of formed and welded 1/4" steel with a hinged opening. Zinc plated proof coil chains are included with these elevators. The 2" thru 6" elevators use 1/4" chain and are rated 1250 lbs test. Elevators 8" and larger use 5/16" chain and are rated 1750 lbs test. |
DENVER STOCK ELEVATOR SIZES |
 |
|
| $ 220.00 Pair | 2" Elevator for 2 3/8" OD | |
| $ 244.00 Pair | 4" Elevator for 4 1/2" OD | |
| $ 248.00 Pair | 4 1/2" Elevator for 5" OD | |
| $ 252.00 Pair | 5" Elevator for 5 9/16" OD | |
| $ 270.00 Pair | 6" Elevator for 6 5/8" OD | |
|
||
| SPECIAL ORDER ELEVATOR SIZES | ||
| $ 226.00 Pair | 3" Elevator for 3 1/2" OD | |
| $ 340.00 Pair | 8" Elevator for 8 5/8" OD | |
| $ 588.00 Pair | 10" Elevator for 10 3/4" OD | |
| $ 592.00 Pair | 12" Elevator for 12 3/4" OD | |
| $ 640.00 Pair | 14" Elevator for 14" OD | |
| $ 660.00 Pair | 16" Elevator for 16" OD | |
|
|
 |
#26JS Flush Joint PVC Casing Clamp is a unique pipe holder that will handle all styles of 2" thru 6" plastic pipe. Although especially designed for flush OD pipe ( smooth OD with no outside coupling ), it will work equally well on normal belled end or coupled plastic pipe.No special inserts are needed. It is quick acting, as just one turn of the screw assembly locks the pipe in place. Large opening in base accommodates up to 6" couplings. Clamp has a strong aluminum base plate. Field proven and tested to over 4000 lbs, this pipe holder is excellent for monitoring holes or water well applications. This casing clamp is a Denver stock item. |
|
| The #122JS Flush Joint PVC Casing Clamp will handle all
styles of 1/2" thru 2" plastic pipe ( accommodates a 2" coupling ) and is available on a special order basis from the factory. |
|
| The #810JS Flush Joint PVC Casing Clamp will handle all
styles of 8" thru 10" plastic pipe ( accommodates a 10" coupling ), and is available on a special order basis from the factory. |
|
|
| This tool allows you to make accurate, square cuts at floor level or in other blind locations. Easily preset for depth of cut, they slide inside the pipe and make their cuts in seconds. User must supply power source ( 1/2" capacity, 350 - 450 rpm drill, rated at 4.6 to 6 amps is recommended ). |  |
| $ 76.00 | 2" Sch 40 Internal PVC Cutter has a cutting range of 1 5/8" to 8 1/4" from the top of your 2" Sch 40 PVC or ABS pipe. |
| $ 24.95 | #1293 Replacement cutter for 2" internal PVC cutter. |
| $ 106.00 | 4" Sch 40 Internal PVC Cutter has a cutting range of 1 5/8" to 11 5/8" from the top of your 4" Sch 40 PVC or ABS pipe. |
| $ 34.50 | #4293 Replacement cutter for 4" internal PVC cutter. |
| $ 186.00 | 6" Sch 40 Internal PVC Cutter has a cutting range of 1-5/8" to 11-5/8" from the top of your 6" Sch 40 PVC or ABS pipe |
| $ 34.50 | Use #4293 cutter blade for the 6" internal PVC cutter, the same on as used in the 4" internal PVC cutter. |
| $ 199.00 | 6' Long Drive Shaft for use with 1-1/2" and 2" internal PVC cutters. #700777 |
| $ 199.00 | 6' Long Drive Shaft for use with 3", 4" and 6" internal PVC cutters. #700778 |
| $ 92.00 | 3" Sch 80 Internal PVC Cutter has a cutting range of 1-5/8" to 11-5/8" from the top of your 3" Sch 80 PVC or ABS pipe. |
| $ 29.50 | #3293 Replacement cutter for 3" Sch 80 internal PVC cutter. |
|
|
|||
 |
Pipe Hogs are used to ream out PVC pipe fittings that need repaired. The reamer cleans out the inside so that a new piece of pipe can be inserted and glued. | ||
| $ 89.50 | 2" Pipe Hog Reamer for 2" Sch 40 PVC pipe fittings. | #16200 | |
 |
$ 109.00 | 4" Pipe Hog Reamer for 4" Sch 40 PVC pipe fittings. | #16400 |
| $ 20.50 | Reamer Guide for 2" Sch 80 PVC used with #16200 2" Reamer | #700589 | |
| $ 24.95 | Reamer Guide for 4" Sch 80 PVC used with #16400 4" Reamer | #700591 | |
| Download Pipe Hog Reamers on PDF Page 87 | |||
|
|
 |
Drop Pipe Vise Grip for Poly Pipe is a handy and
inexpensive pipe holder for either 1" or 1 1/4" polyethylene coiled plastic
pipe. Similar to normal vise grips or channel locks, the serrated split coupling grips the
smooth walled poly pipe during installation or removal. This tool has a non-shock load
limit of 1000 lbs.
#DPVGPP is for 1" poly pipe |
|
Prices effective July 1, 2011 |
