CRAWL SPACE
PUMP SYSTEM
DEAN BENNETT SUPPLY
Independent Zoeller Pump Distributor
1-800-621-4291
Smart Phone Dialable
| Zoeller's CRAWL SPACE PUMP SYSTEM |
|
DEAN BENNETT SUPPLY |
ELIMINATE DAMPNESS & WATER
FROM YOUR CRAWL SPACE
| Zoeller's Crawl Space Pumping System is used to
collect and remove ground water and seepage from your crawl space. The pump system will
help eliminate mold and fungus, odor, moisture damage to floor or structure, and water
pooling in yard, driveway, or around the house. The slotted basin is put into the ground with screening around it. The water collects in the basin, and is pumped away to prevent damage to your foundation. |
|
Model 108 w/ M53 pump, basin, and discharge hose |
$ 312.00 |
The above system consists of the slotted basin, discharge hose, and an M53 automatic sump pump. |
|
|
Select an area where water collects, usually near a foundation. Dig a hole for the basin, making it about 6" larger than the basin, and deep enough to allow the basin top to be about 2" above the ground. Plumb your drainage pipe in to the basin area before installing the basin. Install the basin with your drain lines in, and install the pump. Plumb the discharge pipe so it goes away from the structure. Connect the pump to a three prong grounded receptacle and test unit. Placing plastic sheeting on the ground and sloping it toward the basin will help collect water and keep the area dry. Backfill the hole around the basin with gravel that is larger than the slots in the basin. |
|
Prices effective October 1, 2011
