Flint and
Walling
6" Submersible Pumps |

|
Flint and Walling was
established in 1866 making it one of the oldest pump companies in the United States. With
the growth of electricity to rural areas in the early 1900s, the company placed more
emphasis on designing electric powered equipment. By the early 1930s Flint and Walling had
pioneered a line of convertible jet pumps which earned them a reputation of product
leadership in water well pumps.
Flint and Walling's 6" submersibles carry on with the pioneering tradition. The 6P
series is a high capacity 6" submerisble for commercial, municipal, industrial and
agricultural applications. Any water well requiring a high capacity output and having a
6" or larger casing, can be matched to one of F&W's quality submersibles. If you
need more than
120 GPM, The 6T series of 6" Turbine submersibles will fill the bill.
DEAN BENNETT SUPPLY CO.
DENVER, COLORADO
1-800-621-4291
The following links will take you to your
desired horsepower.
Complete pricing and capacity information is shown on these
submersible pump pages.
5 hp
7.5 hp
10 hp
15 hp
20 hp
25hp
30 hp
40 hp
50 hp
Please call us at 1-800-621-4291 for assistance in selecting the proper pump for your
well. It takes only a few minutes, and you will get a pump that is designed to give you
the
best performance for your well conditions, as well as a great price.
SUBMERISBLE PUMPS QUALIFY TOWARD OUR $ 1000.00
FULL FREIGHT PREPAID ORDER POLICY
AND CAN BE COMBINED WITH TANKS, WIRE AND
ANYTHING BUT PIPE FOR PREPAID FREIGHT
What you can't see really counts
- Quality Components

|

6P Series Submerible has one piece cast iron 3"
NPT discharge head
and rugged cast iron mounting ring.
Pressed in Bronze Sleeve Bearing
302 Stainless Steel Cable Guard insures
wires are protected from damage.
304 Stainless Steel Pump Shell is threaded
on both ends for easy attachment of the discharge head and mounting ring.
Stainless Steel Thrust Sleeve Bearing and
marine rubber bearing in each stage, for smooth quiet operating and a long life.
Precision Molded Fiberglass Reinforced Noryl Impellers and
Diffusers with ultra smooth water passages for maximum performance and
efficiency are matched to Delrin diffuser plates.
416 Stainless Steel 3/4" Hex Drive Shaft with
one-piece stainless steel motor to shaft coupling.
Stainless Steel Suction Screen is corrosion
resistant.
Cartridge Assembly for all horse power sizes
include all necessary parts to restore the pump to like new performance. Field serviceable
with no special tools required.
Complete selection of Franklin NEMA Motors
in stainless steel to meet all water conditions.
|

|

|
6" Turbine Style Submersibles
in 5 hp up through 50 hp and available in 200 gpm, 250 gpm and 325 gpm models.
One Piece Cast Iron 4" NPT discharge
head and mounting ring.
Fine Grain Cast Iron Turbine Bowls with the
latest hydraulic design for high efficiency.
Precision Balanced Bronze Impellers
Dual Bronze and Marine Rubber Bearings in each stage
to reduce vibration, resist abrasion and provide excellent shaft alignment.
|
Warranty:
The warranty on 6"
submersibles is completely different than it is on 4" submersibles. Flint and Walling
6" submersibles are guaranteed to be free from defects in material and workmanship
under normal use and service, when properly installed, used and maintained, for a period
of one year from date of purchase. For this reason, warranties are only approved after
Flint and Walling has inspected the pump in question.
For Zoeller sump and sewage pumps visit
www.sewagepumpsales.com
For Aermotor windmills and livestock water www.aermotorwindmills.com
F&W Pump Index

Download
our catalog in pdf format